💼 চাকরি
Urgent Requirements Of RTR Technicians Who Can Join Immediately
দরকষাকষি করা যাবে
দাম্মাম · পোস্ট করা হয়েছে 22h ago · 4 বার দেখা হয়েছে
পাবলিক জায়গায় দেখা করুন এবং জিনিস দেখার আগে কখনো টাকা দেবেন না। Expatriates KSA কোনো পেমেন্ট পরিচালনা করে না।
Description
Al Moallam Group is looking for full-time RTR Technicians with valid Iqama who can join immediately. The candidates should have the following:
1. Job Summary
The RTR Technician is responsible for the installation, assembly, jointing, inspection, maintenance, and repair of Reinforced Thermosetting Resin (RTR) piping systems in industrial and oil and gas facilities. The role requires practical experience in RTR pipe installation, pipe jointing techniques, fitting installation, and compliance with approved project specifications, quality standards, and safety procedures.
2. Key Responsibilities
Install, assemble, and maintain RTR piping systems in accordance with approved drawings, project specifications, and manufacturer instructions.
Perform RTR pipe cutting, measuring, alignment, and preparation before jointing.
Carry out RTR pipe jointing using approved techniques, including adhesive bonding and laminated joints, as applicable to the piping system.
Install RTR pipes, fittings, flanges, valves, and other associated components.
Prepare pipe surfaces and ensure proper cleaning, dimensional accuracy, and alignment before jointing.
Follow specified curing times and environmental requirements for bonded or laminated joints.
Inspect completed joints for visible defects, misalignment, improper bonding, and other workmanship issues.
Support hydrostatic or other specified pressure testing activities in accordance with approved procedures.
Handle, store, and transport RTR pipes and fittings carefully to prevent damage.
Read and interpret piping isometric drawings, general arrangement drawings, and installation instructions.
Coordinate with supervisors, QC inspectors, and other trades to ensure work progresses according to the project schedule.
Report defective materials, damaged pipes, installation issues, and nonconformities to the supervisor.
Maintain proper housekeeping and ensure tools and equipment are kept in good working condition.
Comply with applicable project quality requirements, permit-to-work procedures, and HSE regulations.
3. Qualifications and Experience
ITI, vocational training, or relevant technical experience in piping or a related discipline.
Minimum 3–5 years of relevant experience in RTR/GRP/FRP piping installation and jointing, preferably in industrial or oil and gas projects.
Practical knowledge of RTR pipe cutting, fitting installation, alignment, and joint preparation.
Experience with adhesive bonding and/or laminated jointing methods, as required by the project.
Ability to read and understand piping drawings and installation instructions.
Knowledge of pipe handling, storage, and installation safety requirements.
4. Technical Skills
RTR/GRP/FRP pipe installation and assembly.
Pipe cutting, surface preparation, and jointing.
Adhesive bonding and laminated jointing techniques, where applicable.
Installation of bends, tees, reducers, flanges, and other fittings.
Pipe alignment and dimensional checks.
Basic understanding of pressure testing and inspection requirements.
Familiarity with manufacturer-specific installation procedures.
5. Safety and Quality Requirements
Follow project-specific HSE procedures and approved work permits.
Wear appropriate PPE when handling pipes, resins, adhesives, and cutting equipment.
Follow manufacturer safety instructions for chemicals, adhesives, and laminating materials.
Ensure adequate ventilation when working with resins, solvents, and adhesives.
Follow applicable fire prevention and chemical handling procedures.
Ensure that all installation and jointing activities meet approved quality standards and project specifications.
Report unsafe conditions, damaged materials, and defective joints immediately.
6. Preferred Experience
Previous experience in Saudi Aramco, petrochemical, water treatment, or other industrial projects.
Familiarity with client-specific piping installation and inspection requirements.
Experience working with RTR/GRP/FRP piping systems for industrial water, cooling water, firewater, or other project-specific services.
If interested, please send us with the updated CV and certifications ASAP to the below mentioned E mail ID mentioning the job position as mail subject.
careers@almoallam.com
1. Job Summary
The RTR Technician is responsible for the installation, assembly, jointing, inspection, maintenance, and repair of Reinforced Thermosetting Resin (RTR) piping systems in industrial and oil and gas facilities. The role requires practical experience in RTR pipe installation, pipe jointing techniques, fitting installation, and compliance with approved project specifications, quality standards, and safety procedures.
2. Key Responsibilities
Install, assemble, and maintain RTR piping systems in accordance with approved drawings, project specifications, and manufacturer instructions.
Perform RTR pipe cutting, measuring, alignment, and preparation before jointing.
Carry out RTR pipe jointing using approved techniques, including adhesive bonding and laminated joints, as applicable to the piping system.
Install RTR pipes, fittings, flanges, valves, and other associated components.
Prepare pipe surfaces and ensure proper cleaning, dimensional accuracy, and alignment before jointing.
Follow specified curing times and environmental requirements for bonded or laminated joints.
Inspect completed joints for visible defects, misalignment, improper bonding, and other workmanship issues.
Support hydrostatic or other specified pressure testing activities in accordance with approved procedures.
Handle, store, and transport RTR pipes and fittings carefully to prevent damage.
Read and interpret piping isometric drawings, general arrangement drawings, and installation instructions.
Coordinate with supervisors, QC inspectors, and other trades to ensure work progresses according to the project schedule.
Report defective materials, damaged pipes, installation issues, and nonconformities to the supervisor.
Maintain proper housekeeping and ensure tools and equipment are kept in good working condition.
Comply with applicable project quality requirements, permit-to-work procedures, and HSE regulations.
3. Qualifications and Experience
ITI, vocational training, or relevant technical experience in piping or a related discipline.
Minimum 3–5 years of relevant experience in RTR/GRP/FRP piping installation and jointing, preferably in industrial or oil and gas projects.
Practical knowledge of RTR pipe cutting, fitting installation, alignment, and joint preparation.
Experience with adhesive bonding and/or laminated jointing methods, as required by the project.
Ability to read and understand piping drawings and installation instructions.
Knowledge of pipe handling, storage, and installation safety requirements.
4. Technical Skills
RTR/GRP/FRP pipe installation and assembly.
Pipe cutting, surface preparation, and jointing.
Adhesive bonding and laminated jointing techniques, where applicable.
Installation of bends, tees, reducers, flanges, and other fittings.
Pipe alignment and dimensional checks.
Basic understanding of pressure testing and inspection requirements.
Familiarity with manufacturer-specific installation procedures.
5. Safety and Quality Requirements
Follow project-specific HSE procedures and approved work permits.
Wear appropriate PPE when handling pipes, resins, adhesives, and cutting equipment.
Follow manufacturer safety instructions for chemicals, adhesives, and laminating materials.
Ensure adequate ventilation when working with resins, solvents, and adhesives.
Follow applicable fire prevention and chemical handling procedures.
Ensure that all installation and jointing activities meet approved quality standards and project specifications.
Report unsafe conditions, damaged materials, and defective joints immediately.
6. Preferred Experience
Previous experience in Saudi Aramco, petrochemical, water treatment, or other industrial projects.
Familiarity with client-specific piping installation and inspection requirements.
Experience working with RTR/GRP/FRP piping systems for industrial water, cooling water, firewater, or other project-specific services.
If interested, please send us with the updated CV and certifications ASAP to the below mentioned E mail ID mentioning the job position as mail subject.
careers@almoallam.com